
Line and ground impedance measurements with CPC 100 & CP CU1
主要特点
Learn how to connect the test set by following relevant safety procedures. Get familiar with the CP CU1 for line impedance measurements to calculate the settings for protection parameterization as well as for ground impedance and touch potential measurements to assess your grounding systems.
学习目标
- Connecting the test set to a power line by following relevant safety procedures
- Performing line impedance measurement by using the dedicated template
- Interpreting the results of the line impedance measurement and get the relevant data for the distance relay settings
- Performing ground impedance as well as step and touch voltage measurements by using the dedicated templates
- Interpret the results of the ground impedance and step and touch voltage measurements
内容
- K-factor theory for understanding of relay parameterization
- Application and usage of the CP CU1 hardware
- Connection of the test set to the power line
- Performing and assessing line impedance measurements
- Derive settings for the distance protection device
- Performing and assessing ground impedance / step and touch potential measurement
时间
1 day
时间表
Day 1: 08:45 a.m. - 05:30 p.m.
Day 2: 09:00 a.m. - 05:30 p.m.
Day 3: 09:00 a.m. - 04:00 p.m.
资料
You will receive a personal email with all course information such as agenda and route directions shortly before the training course.
You can select your desired hotel from our hotel recommendations in UK Training Center83 kB and book it directly according to your preferences.
All training dates are scheduled depending on COVID-19 restrictions at the time of the training taking place, and may be cancelled at any time leading up to the training course. OMICRON would highly recommend booking any hotels/transport etc which are fully flexible and can be cancelled/amended at short notice.
参加者
The Sequencer test card
The dedicated templates for line impedance, ground impedance as well as step and touch voltage measurement
The CP CU1 and CP GB1
The CP AL1
必备知识
Knowledge of electrical engineering
产品
The Sequencer test card
The dedicated templates for line impedance, ground impedance as well as step and touch voltage measurement
The CP CU1 and CP GB1
The CP AL1

„所有的培训主题都很有意思并且培训师很好的进行了演示和说明。“